Rate this product
Mighty Plunger is an innovative simple-to-use solution to a variety of clogs and blockages. It’s designed to be easy to use, for any family member. It can be pressurized quickly, even with a bicycle pump. There’s an easy to read pressure gauge that tells you when it’s ready. You don’t need an auger, a plumbing snake, or even a plumber because of how versatile it is. Mighty Plunger unblocks blockage in seconds – sludge, hair, toilet paper, and food leftovers. The device can be used in kitchen sinks, basins, bathrooms, and more.
The cost of Mighty Plunger is $39.98 plus $6.95 shipping, for a total price of $46.93.
Price is from As Seen on TV Commercial page: mightyplunger.com
The plunger is a light device, which can be easily handled by anyone, and is comfortable to use. Its press button is easy to manipulate with the thumb. The pressure air valve to connect your pump to is on the other side. It doesn’t take too much pressure to power the plunger. Mighty Plunger is suitable for single-handed use due to the hygienic and convenient handle.
The Mighty Plunger is very compact and easy to store, so stash it away in a corner of the bathroom, or in a closet, without it getting in the way.
There is no special equipment, tool, or manual needed to operate the plunger. All that is needed is a normal air pump, like a bicycle air pump, or a balloon air pump. Once you add enough pressure, position it on the problematic pipe, and press the button. Voila! The nasty stuff choking up your pipe is gone.
The plunger comes with two sturdy cups for free. These cups are designed differently to fit on almost all types of drain holes. Switch between the two attachments for the utility sink, kitchen sink, shower, bathtub, Jacuzzi, bathroom sink, and the toilets.
Mighty Plunger works with a different, more radical goal in mind, unlike other plungers. It aims at saving you time and money. One device can save you hundreds of dollars in the form of service bills, new parts, snakes, or augers. It's the most economical solution because all you need is any old air pump to power it. No electric parts, no cables, just one simple handy device.
Get rid of even the toughest blockages instantly, no fuss whatsoever. It is so powerful that it needs just one pump – one press of the button – to unblock your pipes. This takes no longer than a few seconds. No pumping and plunging for ages. Unblock your pipes before you even think of calling the plumber.
The plunger fits all types of bowls of toilets and eliminates clogs easily with maximum pressure. Two attachments are provided for free with the plunger. These robust rubber cups fit like a seal onto a drain hole tightly for an easy unblock.
Chemicals like drain cleaners and bleach might kind of help with a stubborn clog, but it damages more than it fixes. Using chemicals to remove a block is a time consuming, and tiring process. Furthermore, exposing yourself or the pipes to these chemicals could be harmful. It is equally harmful to the environment. The Mighty Plunger eliminates the need for these chemicals since it removes all blocks with pressure.
No one wants to be the one to unclog sinks. It’s a messy, smelly job in an area infested with germs. Gloves can only do so much in terms of protection. With the plunger, you don’t have to touch anything. You can even unclog the shower floor drain hole in a few seconds.
Where good health is concerned precautions are so much better than going to the doctor. Clogs can be incredibly dirty, smelly, and infested with harmful micro-organisms. This is no secret, but these can pose a very real danger to the health of your family. Damp areas are fertile breeding grounds for many bacteria, some of which are certainly harmful. For all these reasons, it really is advisable to clear a blocked pipe, and so avoid possible infections. If left as it is, these pipes become smelly, and often regurgitate dirty water and gunk back into the sink.
The makers of the Mighty Plunger take customer satisfaction seriously. Post-sales support and satisfaction are handled by a well-staffed after-sales service. To ensure that customers are cared for, there is a 90-day return policy. This is in case the device didn’t fit a person’s needs, or if a customer changes his or her mind, uses another device, or wishes to return the device for any other reason. Therefore, if you are unsatisfied for any reason, and would like to get a refund, it is possible to get one. However, in order to avail a full refund, the product must be returned within no more than 30 days from the date of purchase.
In the long term, constant clogs can end up being potentially very expensive. Clogged drains are a very common problem, but these repairs are not minor ones and cost a lot. When harsh or incorrect cleaning agents are used in an attempt to remedy the problem, the pipes might end up getting damaged. Using a drain snake only causes the pipe to choke up even more. Even worse, things lead up to requiring the service of a plumber, whose charges are hardly cost-effective. This plunger aims at eliminating the scenario where a plumber is needed for clogs. You shouldn't pay the plumber an exorbitant amount simply to unclog some hair. The Mighty Plunger, when used regularly, will keep the pipes clean as a whistle.
Plumber’s Hero is a handheld compact device that comes with a formula. This liquid is supposed to help with unclogging. Manufacturers say that this device lasts 10 years, but can give you only 20 uses. The Plumber’s Hero formula, when mixed with water, helps clean and drain the pipes, removing all traces of damp garbage. It’s said to have been tried and tested in field tests, showing that it works on garbage bags and garbage disposal.
Spin plumber is an attachment that can be used with any household drill. This device does not plunge out filth but uses a tornado motion to gather it. Using the RPM and torque from the drill, it creates a tornado that collects the dirt. It is 3 feet long. The Spin plumber is said to be eco-friendly, and easy to use. It’s a wire-like tool that you can attach to one’s drill.
For a plunger, this is one of the most expensive you can buy. While other plungers might not be as efficient as it can be difficult to apply enough pressure, they are considerably cheaper and with the right technique can be just as effective. There are few people who desire a high-end plunger enough to spend a lot on it and this is a major concern for a lot of users.
The Mighty Plunger requires a bike pump to build up the pressure, however, this isn't provided as part of the package when purchasing the product. This means that the user either needs to provide one from their own home or needs to buy one before the item can be used properly.
While not plunger is particularly small, the Might Plunger is significantly larger than the majority on the market. Plungers are something that the majority of people try to keep discreet and tucked away, however, this would be significantly more difficult with the Might Plunger. It is large and bulky without including the extra bike pump that is needed to make sure it works properly.
By building the pressure within the product before releasing it into the drain, the Might Plunger is able to produce enough force to clear blockages. It is very difficult to build this pressure using a standard plunger, however, as it is done by using a bike pump the pressure can be built up within the product beforehand. There is a gauge on the side of the item to make sure that the user can easily and quickly check to see what pressure is inside the item before applying it to the drain.
Standard plungers rely on the user providing the pressure manually which can be very difficult without the proper technique. The Mighty Plunger uses a bike pump to pre-pressurise the product meaning it can quickly and effectively dispell the air from within the item in one fell swoop. This makes it a lot more effective at removing blockages and is a lot easier for anybody to use without calling a plumber.
There are a number of similar products on the market, however, a large proportion of these require pressurizing in a different manner. While some have electric pumps there are some that need canisters to build the pressure in the product before use which is an added expense that will need replacing on a regular basis.
There is a screw on the port for the bike pump to attach it to the Mighty Plunger on the side. Screw this in place until the bike pump cannot screw on further.
Using the bike pump to build the pressure, simply pump the bike pump in the same way you would use it on a bike wheel.
The handy gauge on the side of the product lets the user know when the pressure is high enough to be used.
There are two separate heads for the Might Plunger that can be used for either the toilet or on sinks. Attach the correct head and then place it over the drain.
Once the plunger is in place simply press the button on the top of the product to release the pressure and flush the blockage away.
Average Customer Rating:0
Click to View
Sort Reviews: Newest | Helpful | Highest | Lowest
Sort: Questions | Comments
How do I attach the drain fitting to the Mighty Plunger so they stay on
There are NO instructions for the attachments for this in the box
0 of 1 people found this review helpful.
Was this review helpful to you?
TV Stuff Reviews is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Get notified of NEW As Seen on TV items!
You can disable anytime.